Photon point sources
Dose distribution in water of monoenergetic photon point sources from 10 to 2000 keV, calculated with PENELOPE and GEANT4.
- 40 energies
- 10–2000 keV
- PENELOPE · GEANT4
Calculation details
These tables correspond to simulations of monoenergetic photon point sources of energies between 10 and 2000 keV in water. Simulations have been performed with PENELOPE (v. 2003) and with GEANT4 (v. 4.5.2).
The tables are organized by energies. In the preamble of each one, the information quoted is the following:
- The energy of the photon point source, in keV.
- The number of histories followed, which in the present calculation is 3·107.
- The mass energy-absorption coefficient in cm2 g−1, which has been obtained from the data of Hubbell and Seltzer1, interpolating when necessary.
- The air kerma strength per unit activity in nGy cm2 Bq−1 h−1. The air kerma strength has been calculated as
S = cAE(μen/ρ)/(4π) ,where c = 0.5768 μGy kg h−1 keV−1 MBq−1.
- The dose rate constant in cm−2, calculated as
Λ = Ḋ(r0)/S ,where Ḋ(r0) is the dose rate at the reference point r0 = 1 cm in water. In the tables the values obtained for both PENELOPE and GEANT4 are given.
The results quoted in the tables have been obtained using two different phantoms: an infinite water phantom and a spherical finite phantom with a radius of 15 cm, filled with water and with the point source situated at its center. In both cases the scoring voxels have been chosen to be concentric spherical shells with thickness 0.5 mm and centered in the point source. The first voxel has a thickness of 0.25 mm.
In our simulations, the energy deposited in each voxel j, Ej, was scored to obtain the histograms corresponding to the dose rate Ḋ(r). We labeled Ḋj the value corresponding to the j-th voxel.
To avoid the effect of the geometric factor (r−2 in this case) which dominates Ḋ(r), we have calculated also the quantity
in two different ways. First, we have simulated this quantity by scoring directly (r2E), thus obtaining Rj for each scoring shell j. The columns 2 and 5 give the results obtained for this quantity calculated with PENELOPE for the infinite and finite phantoms, respectively, in nGy cm2 Bq−1 h−1.
Second, we have calculated this quantity as
for each bin j of the histogram corresponding to Ḋ(r). The results for this quantity are given in columns 3 (PENELOPE) and 4 (GEANT4) for the infinite phantom, and 6 (PENELOPE) and 7 (GEANT4) for the finite one, in nGy cm2 Bq−1 h−1.
In the preceding equation
with rj< and rj> the minimum and maximum r values corresponding to the j-th voxel. The values of this quantity in cm are given in column 1.
1 http://physics.nist.gov/PhysRefData/XrayMassCoef/cover.html
Results by energy
Click an energy to view its results on the website, or download its .out file directly.
| Energy (keV) | μen/ρcm2 g−1 | S/AnGy cm2 Bq−1 h−1 | ΛPENELOPE · cm−2 | ΛGEANT4 · cm−2 | File |
|---|---|---|---|---|---|
| 10 | 4.7420 | 2.1766 | 0.00655(3) | 0.00654(3) | .out · 6.7 KiB |
| 11 | 3.6796 | 1.8578 | 0.02323(3) | 0.02322(3) | .out · 8.9 KiB |
| 12 | 2.8552 | 1.5727 | 0.0561(1) | 0.0562(1) | .out · 10.7 KiB |
| 15 | 1.3340 | 0.9185 | 0.2613(4) | 0.2609(4) | .out · 18.5 KiB |
| 18 | 0.7744 | 0.6398 | 0.4901(6) | 0.4893(6) | .out · 29.3 KiB |
| 20 | 0.5389 | 0.4947 | 0.6501(9) | 0.6482(9) | .out · 38.3 KiB |
| 22 | 0.4193 | 0.4234 | 0.737(1) | 0.738(1) | .out · 45.7 KiB |
| 25 | 0.2878 | 0.3303 | 0.857(1) | 0.859(1) | .out · 60.3 KiB |
| 28 | 0.1975 | 0.2539 | 0.988(2) | 0.980(2) | .out · 73.8 KiB |
| 30 | 0.1537 | 0.2116 | 1.088(2) | 1.087(2) | .out · 81.0 KiB |
| 35 | 0.1025 | 0.1646 | 1.145(3) | 1.142(3) | .out · 104.1 KiB |
| 40 | 0.0683 | 0.1255 | 1.261(3) | 1.262(3) | .out · 124.3 KiB |
| 50 | 0.0410 | 0.0940 | 1.337(4) | 1.323(4) | .out · 152.0 KiB |
| 55 | 0.0353 | 0.0891 | 1.316(4) | 1.310(4) | .out · 166.3 KiB |
| 60 | 0.0304 | 0.0837 | 1.344(4) | 1.341(4) | .out · 177.2 KiB |
| 65 | 0.0287 | 0.0856 | 1.296(4) | 1.288(4) | .out · 184.1 KiB |
| 70 | 0.0271 | 0.0869 | 1.279(4) | 1.273(4) | .out · 197.0 KiB |
| 80 | 0.0241 | 0.0884 | 1.307(4) | 1.303(4) | .out · 204.0 KiB |
| 90 | 0.0237 | 0.0977 | 1.274(3) | 1.267(3) | .out · 217.4 KiB |
| 100 | 0.0233 | 0.1067 | 1.271(3) | 1.264(3) | .out · 220.6 KiB |
| 125 | 0.0241 | 0.1382 | 1.219(3) | 1.220(3) | .out · 246.4 KiB |
| 150 | 0.0250 | 0.1719 | 1.202(3) | 1.201(3) | .out · 255.7 KiB |
| 175 | 0.0258 | 0.2074 | 1.188(3) | 1.189(3) | .out · 267.2 KiB |
| 200 | 0.0267 | 0.2453 | 1.166(3) | 1.164(3) | .out · 279.8 KiB |
| 250 | 0.0277 | 0.3179 | 1.163(3) | 1.152(3) | .out · 289.2 KiB |
| 300 | 0.0287 | 0.3955 | 1.134(3) | 1.138(3) | .out · 293.8 KiB |
| 350 | 0.0291 | 0.4675 | 1.127(3) | 1.133(3) | .out · 293.8 KiB |
| 400 | 0.0295 | 0.5414 | 1.118(3) | 1.121(3) | .out · 293.8 KiB |
| 500 | 0.0297 | 0.6807 | 1.111(3) | 1.113(3) | .out · 293.8 KiB |
| 600 | 0.0295 | 0.8133 | 1.104(3) | 1.101(3) | .out · 293.8 KiB |
| 700 | 0.0292 | 0.9373 | 1.110(3) | 1.102(3) | .out · 293.8 KiB |
| 800 | 0.0288 | 1.0583 | 1.108(3) | 1.099(3) | .out · 293.8 KiB |
| 900 | 0.0284 | 1.1712 | 1.101(3) | 1.101(3) | .out · 293.8 KiB |
| 1000 | 0.0279 | 1.2802 | 1.102(3) | 1.101(3) | .out · 293.8 KiB |
| 1170 | 0.0270 | 1.4525 | 1.104(2) | 1.097(3) | .out · 293.8 KiB |
| 1250 | 0.0267 | 1.5296 | 1.109(2) | 1.108(3) | .out · 293.8 KiB |
| 1330 | 0.0263 | 1.6039 | 1.106(2) | 1.105(3) | .out · 293.8 KiB |
| 1500 | 0.0255 | 1.7536 | 1.116(2) | 1.112(2) | .out · 293.8 KiB |
| 1750 | 0.0244 | 1.9631 | 1.117(2) | 1.114(2) | .out · 293.8 KiB |
| 2000 | 0.0234 | 2.1527 | 1.126(2) | 1.122(2) | .out · 293.8 KiB |
Values taken from the header of each .out file. Values in parentheses give the uncertainty in the last significant digit.